Home > Entertainment > Music in India > Tambura Muscial Instrument
Tambura Muscial Instrument
Tambura is an Indian musical stringed instrument which is available in various designs and styles. It is a long-necked Indian lute, which is unfretted and round-bodied.

Share this Article:

Tambura, String InstrumentMiraj StyleTambura is a type of a stringed instrument used in Indian Classical Music. It is a long-necked Indian lute, which is unfretted and round-bodied. It has derived its name from the Persian word Tanbur. It possesses three different styles which are chosen according to the preference of the performers. This Indian musical instrument contains the vital element of music, drone. The harmonic or monophonic effect is continuously sounded throughout the piece, sustained or repeated, which establishes a tonality upon which the rest of the piece is built. The name `tanpura` is believed to have derived from `tana` that refers to a musical phrase and pura which means "full" or "complete". Thus the tanpura is an instrument which supports and sustains the melody by providing one precise tone, the basic note or key-note. Tanpura or Tambura works on the principle of Jivari.

Structure of Tambura
The Tambura is also commonly known as tanpura in the north, has a hollow neck with four or five wire strings. Structure of Tambura is slightly different in the north and south. The resonating bowl is made of wood in the southern variety, but in upper India it is of a large pumpkin (tumba). Whereas in the southern Tambura, the resonator and the neck are carved out of the same block of wood, in the north, a wooden neck has to be made separately and attached to the gourd. The rest of the instrument is more or less the same in both. However, the southern Tamburas are much smaller than the northern ones.

The northern Tamburas have the gourd of nearly 70 to 90 cm in girth and overall height of 105 to 120 cm. The strings used are: one of brass for Palt Mau two of steel (5a, Sa) and one of steel (Sai). At the lower end, the strings are fixed to a piece of wood, the langote, struck to the gourd. From here they pass over a bridge (Ghoda or Kudirai) to a notched ledge (jneru) and then through the holes of another ledge to the pegs. The pegs are two on the front and one or each side. While these are turned for grosser tuning, finer pitch adjustments are made by the sliding of beads, one for each string, near the lower end. Functionally the most important part of the Tambura is the wide bridge. Made of ebony wood (seesam), ivory or camel bone, it is curved in a direction right angles to the strings and sloping in the direction along their length. The whole bridge is made of one piece and stands on two broad legs; each of these bears a small hole into which fits a protrusion from the covering plank.

In the Hindustani classical music, the Tambura comes in different sizes: bigger "males" and smaller "females". The male instrument has an open string length of one metre; the female is sized down to 3/4. The strings are plucked one after another in a regular pattern to create a tonic resonance field. This Indian musical instrument is available with standard tuning. This instrument produces rich buzzing sound and is applied in order to attain the overtone-rich sound.

Styles of Tambura
The Tambura is designed in three different styles namely Miraj Style, Tanjore Style and Tamburi Style. Each style features different shapes as well as varied working pattern. The styles of Tambura are described as:
Miraj Style
It is the favourite form for Hindustani performers. Miraj style is usually available between three to five feet in length, with a well-rounded resonator plate (tabali) and a long, hollow straight neck. The round lower chamber to which the tabli and the neck (dandh) are fixed is actually a selected and dried gourd (tumba).

Tanjore Style
It is a south Indian style of Tambura, which is used widely by Carnatic music performers. It has a different shape and style of decoration, but is otherwise much the same size as the Miraj style. Typically, no gourd is used, but the spherical part is gouged out of a solid block of wood. The neck is somewhat smaller in diameter.

Tamburi Style
This style is much more popular recently, due to its small size and portability. It is two to three feet long, with a shallow resonator and a slightly curved tabali. It has about four to six strings. The small five-string Tamburi are tuned to the higher octave and are the preferred instruments for providing the drone for solo-performances by string-playing artists.


Share this Article:

Related Articles

More Articles in Music in India


Manjira - Musical Instrument
Manjira, also known as tala, manjeera, jalra, kartal, or khartal, is a traditional Indian percussion instrument. It consists of a pair of small hand. Manjira is widely used in religious ceremonies, folk music, and classical performances, showcasing its versatility and cultural significance.
Bhavageete
Bhavageete is a form of expressionist poetry in light music. It is a significant genre of folk music that unfolds the realities of life in an eloquent manner.
Kriti Carnatic Music
Kriti refers to one of the most widely used genres of Carnatic music. It originated from the kirtanas of the bhaktas, i.e., musicians who expressed their religious devotion through songs.
Music of Uttarakhand
Music of Uttarakhand has its roots in nature. The folk music of Uttarakhand is based on traditions, festivals and folk legends.
Music of Arunachal Pradesh
Music of Arunachal Pradesh reflects the socio cultural life of the people of that state. Music forms an integral part of the festivities of Arunachal Pradesh.
Rajasthani Musical Instruments
Rajasthani musical instruments are widely used as accompaniments as well as individually for entertainment.
Music of Tamil Nadu
Music of Tamil Nadu has an eminent charisma that reflects the pristine essence of the ancient art and culture of the region.
Thumri
Thumri belongs to the light classical genre of North Indian Classical Music that originated in the 15th century. It is known for its emotive melodies, poetic lyrics, and expressive renditions. Primarily sung by female vocalists, Thumri has evolved into a cherished form of music, captivating audiences with its melodic compositions.
Music of Kerala
With its origin in the primitive dances and plays, the music of Kerala has evolved to a high aesthetic sensitiveness and great technical sophistication since ancient times.
Ektara String Instrument
Ektara is a one-string instrument which is most often used in folk music in India. The Ektara was a regular string instrument of wandering bards and minstrels from India and is plucked with one finger.
Indian Musical Instruments
Indian musical instruments can be broadly classified into four categories like stringed, wind, Ghana Vadya and percussion.
Indian Folk Music
Indian Folk Music is full of rustic charm. The appeal of Indian folk music lies in the simplicity of its style and lyrics. Most of the folk songs are accompanied by dances.
Musical Instruments of Assam
Musical Instruments of the Assam are numerous which brings out the richness of the folk culture of the state.
Haryanvi Music
Haryanvi music is the folk music of the state of Haryana and is sung in western Uttar Pradesh along with the neighbouring districts of Rajasthan and Punjab.
Folk Music of West Bengal
Folk Music of West Bengal is practiced in different parts of West Bengal which is the semi-classical devotional genre of Kirtan.
Indian Classical Music
Indian Classical music originated in the Vedas and later branched into two streams of Carnatic and Hindustani music.
Musical Instruments of Ancient India
Musical Instruments of Ancient India, since time immemorial have contributed in making the Indian music more enchanting. A number of instruments have developed over time, which still finds a significant place in the music of modern era.
Carnatic Music
Carnatic music, also known as `Karnataka Sangitam`, is one of the two styles of Indian classical music.
Dotara - Muscial Instrument
The Dotara is a traditional musical instrument originating from Eastern India. This plucked-string instrument holds cultural significance in the region, producing melodious tunes that have been cherished for generations.
Tumbi Muscial Instrument
Tumbi is a type of string instrument that is mostly used in north Indian folk music. It features a high-pitched sound produced by a single metallic string. Popularized by Punjabi singers, the Tumbi has also made its mark in Western music also.
Xylophone Musical Instrument
Xylophone is a musical instrument consisting of several wooden bars which are struck with mallets; it belongs to the family of percussion instruments.